Large OD Pipe Coping and Overflow Processing
Large-diameter pipe work can consume production time quickly, especially when the cut list includes saddles, branches, miters, holes or weld-prep geometry. Dark Horse Metals provides large-OD cutting and profiling capacity for fabricators, mechanical contractors and industrial projects.
Working range from 16 through 36 inches OD
The shop handles qualified pipe processing from 16 through 36 inches outside diameter. Wall thickness, material and cut geometry are reviewed against the drawing before the job is released to production.
More than straight cut-offs
Drawing-driven work can include copes, compound saddles, off-axis branches, miters, slots, holes, bevels and other tubular connection profiles. The HGG PC 900 RB provides a production route for complicated geometry that would otherwise tie up internal capacity.
Toll processing or a full material package
Customers can provide their own pipe for processing, or Dark Horse Metals can quote the steel and processing together. That gives shops a practical overflow route when their own pipe line is full or the project exceeds their normal size range.
Support for complicated connections
Mechanical and structural pipe assemblies often require cuts that interact with several surfaces at once. Compound angles, branch intersections and weld-prep requirements are easier to control when the profile comes directly from the approved model, DXF or cut data.
Finished profiles are inspected before release. Where a connection includes aligned holes, Dark Horse Metals uses gauge verification to check the physical alignment.
Overflow capacity without changing the whole supply chain
A customer can keep its normal purchasing and fabrication workflow while sending only the qualified overflow work to Dark Horse Metals. That makes the service useful for peak demand, unusual diameters and one-time projects that do not justify tying up internal equipment.
Leave a comment