Skip to content
H-pile and structural beam material loaded for delivery

H-Pile and Structural Beam Supply for Deep Foundation Work

H-pile and structural beam orders are driven by section, grade, length, quantity and schedule. The material has to match the project documents, but it also has to arrive in the release sequence the field can use.

Material for foundation and structural packages

Dark Horse Metals supplies H-pile sections and structural beams for deep foundation, industrial and structural work. Project-specified grades and sections are reviewed before the material package is released.

Cut-to-length and drawing-based processing

Cut lengths, drilling, coping and other project-specific processing can be reviewed from the drawing or cut list. Packaging the processing with the steel reduces the number of separate handoffs between the mill length and the field.

Phased releases and delivery

Foundation and structural projects often move in releases instead of one shipment. Quantities, lengths, staging, delivery location and handling requirements can be coordinated around that sequence.

Order review before release

Section, grade, dimensions and completed processing are checked against the order before the steel leaves Dark Horse Metals.

Foundation steel is more than a section designation

The same H-pile section can be ordered in different grades, lengths and release quantities. Material planning has to account for the project specification, available stock lengths, cutting plan and delivery sequence.

Processing can reduce field handling

When the drawing calls for cut lengths, holes, copes or connection preparation, completing that work before shipment can reduce field handling and keep the installation sequence moving.

Dark Horse Metals coordinates the material and processing as one package, then checks the finished order against the approved requirement before release.

See H-pile and structural beam capabilities.

Previous article Data Center Pipe Support Steel: Coped Pipe, Gussets and Plate
Next article Micropile Starter and Cutting Components: CJ2, U7L, GeoRoc and J-Teeth

Leave a comment

Comments must be approved before appearing

* Required fields

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare